Videotec ULISSE MAXI Manuel D'instructions page 45

11 Accessories
For further details on configuration and
use, refer to the relative manual.
11.1 Washer
The P&T can be equipped with an external pump that
supplies water for the glass to be cleaned.
When a control is provided, the Pan & Tilt is
positioned with the window in front of the nozzle. (
10.1.4 User Controls page, page 36). The pump and
wiper are activated for a set period of time. At the end
of the operation the P&T returns to its initial position.
Fig. 86
MNVCUPTMAXIR_2104_EN
11.1.1 Washing system connection
CAUTION! TNV-1 installation type. The
installation is type TNV-1, do not connect it
to SELV circuits.
CAUTION! In order to reduce the risk of fire,
only use UL Listed or CSA certified cables
with sections greater than or equal to
0.14mm² (26AWG).
All signal cables must be grouped together
by means of a cable tie.
WASHING SYSTEM CONNECTION
Terminals
O1-C1
Tab. 13
Fig. 87
Description
Clean contact to activate the
washing system.
O1 C1
43