Videotec ULISSE MAXI Manuel D'instructions page 12

4 Identification
4.1 Product description and type
designation
ULISSE MAXI NETCAM is a powerful Full-IP PTZ for
outdoor IP video surveillance, which can manage
modern IP SD, HD and Megapixel cameras, with
integration in a network system.
This model can house and manage the largest
motorised lenses on the market, taking a total weight
of up to almost 8 kilos.
This way a single unit can provide a 360° coverage of
the area to be monitored.
A special feature of ULISSE MAXI NETCAM is the
ability to easily control, via the network, all the
camera's pan & tilt functions, including wiper, preset
and set-up, using the most common VMS on the
market.
It is possible to use any ONVIF compatible Profile S
camera, or proprietary protocol on RS-485, whilst the
entire management of the system only requires an IP
address.
The Videotec's PTZ ASSISTANT plug-in software
supports any VMS with the control of all special
functions such as wiper, washer pump and IR.
The unit is equipped with a wiper for removing
rain and dust from the front glass; there is a wide
selection of jerry cans with washer pump, different
capacities and heads.
To ensure detailed images even during the night
hours, versions are available with LED illuminators,
with infrared light or white light.
The sturdy mechanical structure and the powerful
motors of this PTZ are designed to guarantee
maximum resistance to high operating stress,
vibrations and temperatures between -10°C to +60°C.
The unit is equipped with optical sensors which
ensure the accurate control of the position in any
condition of use.
Models are available for vision with a thermal camera.
10
4.2 Product marking
Pan & tilt devices have a label complying
with CE markings.
Fig. 1
The label shows:
• Model identification code (Extended 3/9 bar code).
• Supply voltage (Volt).
• Frequency (Hertz).
• Current consumption (Amps).
• Protection degree (IP).
• Serial number.
4.2.1 Checking the markings
Before proceeding further with installation, make
sure the material supplied corresponds to the order
specification by examining the marking labels.
Never, under any circumstances, make any changes
or connections that are not shown in this handbook.
Improper use of the appliance can cause serious
hazards, risking the safety of personnel and of the
installation.
MNVCUPTMAXIR_2104_EN