What If There Are Problems; Technical Data; Disposal; Warranty And Service - Beurer MC5000 Mode D'emploi

8.

What if there are problems?

Problem
Grinding noises during
operation.
The massage cannot
be started.
Back rest or leg rest
cannot be raised or
lowered.
The massage function
stops when the chair is
in operation.
9.

Technical Data

Product description
Mains voltage/frequency
Energy consumption
Dimensions (in flat position)
Weight
Maximum load capacity
10.

Disposal

Observe the local regulations for material disposal.
Dispose of the unit in accordance with EC Directive
2002/96/EC – WEEE (Waste Electrical and Electronic
Equipment).
11.

Warranty and service

In the event of a warranty claim or service case,
please contact Customer Services in your respective
country.
You can find the address in the enclosed address list.
Cause
These noises are normal and originate from
the operating motor or from the massage
rollers rubbing against the cushion.
The mains plug is not connected to
the socket.
The massage chair is not switched on at
the main switch.
The cutout switch for the massage chair
has interrupted the power supply.
Back rest and/or leg rest are overloaded
or blocked.
The overheating protection was triggered.
The maximum operation period was
reached.
Massage chair MC5000
220-240 V ~ 50/60 Hz
200 W
Length 191 cm, width 73 cm, height 64 cm
Net 61 kg, with packaging 76 kg
200 kg
Solution
No action is necessary.
> Plug the mains plug into the socket.
> Switch on the massage chair at the
main switch.
> In this case, please contact
Customer Service.
> Remove the objects blocking
the device.
> Switch off the massage chair and
allow to cool down for 30 minutes
before switching on again.
If you have any questions, please contact
the local authorities responsible for waste
disposal.
27