What If There Are Problems; Disposal; Technical Specifications - Beurer FM 90 Mode D'emploi

Cleaning the covers
The covers of the massage rollers can be washed by hand. Proceed as follows:
1. To remove the covers from the foot massager, undo the hook-and-loop fastener of the
covers.
2. Wash the covers by hand.
3. Allow the covers to dry. Only insert the covers into the foot massager again when they
are completely dry.
4. Ensure that the hook-and-loop fasteners of the covers are firmly attached to the foot
massager.
Storage
If you do not plan to use the foot massager for a long period of time, we recommend that
you store it in the original packing in a dry environment, ensuring it is not weighed down by
additional items. Store the foot massager away from children and pets. Do not place any
objects on the foot massager.

9. What if there are problems?

Problem
The massage heads
are rotating too slowly
The massage heads do
not move

10. Disposal

For environmental reasons, do not dispose of the device in the household waste
at the end of its service life. Dispose of the device at a suitable local collection or
recycling point in your country. Dispose of the device in accordance with EC Direc-
tive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions,
please contact the local authorities responsible for waste disposal.

11. Technical specifications

Mains operation:
Input
Output
Average active efficiency:
Efficiency at low load (10 %):
No-load power consumption:
Dimensions:
Weight:
Cause
The load on the massage
heads is too great.
The device is not connected
to mains power supply.
Overheating protection
triggered.
100-240 V~, 50/60 Hz, 1.5 A
24.0 V
≥ 89.35 %
≥ 87.87 %
≤ 0.08 W
36 x 42 x 25 cm
approx. 4.5 kg
21
Solution
Free up massage heads.
Connect the mains plug and
switch on the device.
Disconnect the device from
the power supply, wait at least
15 minutes, then plug in again
and switch on.
2.0 A, 48.0 W