Initial Use; Installation Location; Unpacking And Assembly - Beurer MC5000 Mode D'emploi

5.

Initial use

Warning!
• Keep packaging material away from children!
There is a choking hazard.
• Before using the device for the first time, read the
safety notes in the Safety section.
Safety, pages 15 to 16
w

Installation location

• Install the massage chair on a sturdy and even
surface.

Unpacking and assembly

The massage chair MC5000 is delivered in a
cardboard box.
Step 1:
Step 2:
Caution!
• The massage chair could damage your flooring.
Place a suitable, non-slip underlay under the
massage chair.
• Before using the device for the first time, remove all
obstacles in front of and behind the massage chair
so that the back rest can be lowered and the leg
rest raised freely.
Caution!
Do not use sharp or pointed tools (Stanley knife) to
remove the packaging.
> Open the cardboard box and hold the massage chair at the
designated holding points.
> Remove the chair from the cardboard box.
Four persons are required for this.
> Carefully remove all the packaging material
> Unfold the back rest to the upright position until the locking
mechanism audibly engages.
The back rest now stands at approx. 115°.
23