Grundig DTR OB 4000 DAB+ BT Mode D'emploi page 20

SETTINGS
Tuning­and­storing­radio­stations­
(DAB­and­FM)­–­first­installation
When the device is switched on for the first time
or after factory reset, the Auto Tuning System will
start to scan the whole DAB bandwidth and store
in the program list.
The device will then scan the FM waveband and
store the first 10 radio stations as presets 1 to 10.
The time is updated automatically.
1
For the best DAB/FM reception, it is sufficient
to extend the telescopic antenna and direct it
accordingly.
2 Press »ON/OFF« to switch on the device.
– Display: »Welcome to« and then
»Scannin g ··· «.
– The automatic station search starts, searches
and stores the radio stations.
– »Preset Full« displays that 10 FM
radio stations are stored at the presets.
– After the automatic scan, the device switches
to standby, the current time lights up.
Tuning­and­storing­DAB­and­FM­
radio­stations­–­after­a­removal
You can activate the Auto Tuning System again.
That is reasonable, if you will use the device in
another place or search new DAB radio stations.
1
Press »ON/OFF« to switch on the device.
– Display: the name of the radio station, e.g.
»B5 akt«.
2 Open the menu with »Menu«.
3
Select the option »S y stem«
­Tuning/Skip­
with »
r
pressing »Select/i«.
4 Select the option »ATS« with »
Skip­ « and confirm by pressing »Select/i«.
e
– Display: »No«.
5 Select the option »Yes« with »
Skip­ « and start the automatic station search
e
by pressing »Select/i«.
– The automatic station search starts, searches
and stores the radio stations.
– After the automatic scan, the device switches
to standby, the current time lights up.
20­ ­ ENGLISH
­ - --------------------------------------------------------------------------------------------------------------------------------------
« and confirm by
e
­ Tuning/
r
­ Tuning/
r
Storing­DAB­radio­stations­to­
presets
After the automatic station search, all radio sta-
tions will be stored in the program list. You can
store your favored DAB radio stations on presets
1 to 10.
1 Select DAB radio stations with »
Skip­ «.
e
– Display: the name of the radio station, the
radio station will be activated in 1 second.
2
For storing the DAB radio station on a preset,
press and hold down the required preset but-
ton »1« to »5«, until »Preset 2 stored«
appears.
Note:­
II« and the required preset but-
Press »+5­­ e
7
ton »1« to »5« for presets 6 to 10.
Programming­DAB­radio­stations­
–­manually
1
Select the input source DAB with
Alarm«.
2 Open the menu with »Menu«.
– Display: »Full scan«.
3
Select the option »Manual
­Tuning/Skip­
»
r e
»Select/i«.
– Display: e.g. »5A I74.928« (channel and
frequency of a DAB radio station).
4 Select the desired frequency/channel with
» ­Tuning/Skip« or
r
5 Press »Select/i« to confirm the frequency/
channel.
– Display: the signal strength.
6
Press »Select/i« to confirm the setting.
– The DAB radio stations will be stored in the
program list.
­ Tuning/
r
»Mode/
tune« with
« and confirm by pressing
»Tuning/Skip­ «.
e