Grundig DTR OB 4000 DAB+ BT Mode D'emploi page 28

SPECIAL­FUNCTIONS
Call­up­the­software­version
1 Open the menu with »Menu«.
2
Select the option »S y stem« with »
Skip­
« and confirm by pressing »Select/i«.
e
3 Select the option »SW version« with »
Tuning/Skip­ « and confirm by pressing
e
»Select/i«.
– Display: actual software version.
4 Press »Menu« to end the display.
Deleting­all­settings­(Reset)
This function enables you to reset all the custom
settings back to the default settings. All setings are
lost when you do this.
1 Open the menu with »Menu«.
2
Select the option »S y stem« with »
Skip­
« and confirm by pressing »Select/i«.
e
3
Select the option »Factor y Reset« with
­Tuning/Skip­
»
r e
»Select/i«.
– A safety confirmation is displayed.
4 Select the option »Yes« with
«.
e
Note:
To cancel the function select the option »No«
7
by pressing » ­Tuning/Skip«.
r
5
Press »Select/i« to confirm setting.
– Display: »Restartin g «.
Removing­DAB­radio­stations­
from­the­program­list
If you move to a different part of the country,
you should remove DAB radio stations, which
are no longer available from the program list.
These DAB radio stations are marked with "?".
1 Open the menu with »Menu«.
2
Select the option »Prune« with »
Skip­
« and confirm by pressing »Select/i«.
e
– A confirmation message is displayed.
3
Select the option »Yes« with
«.
e
28­ ­ ENGLISH
­Tuning/
r
­Tuning/
r
« and confirm by pressing
»Tuning/Skip­
­ Tuning/
r
»Tuning/Skip­
­--------------------------------------------------------------------------------------------
Note:
To cancel the function select the option »No«
7
­Tuning/Skip«.
with »
r
4 Press »Select/i« to confirm setting.
5
Press »Menu« to end the setting.
­
r
– In the program list you will find only avail-
able radio stations.
Software­Update
You can install the latest version of the software,
if available.
1
Connect the device to a PC by means of the
socket located in the battery compartment.
2 Open the menu with »Menu«.
3
Select the option »S y stem« with »
Skip­
« and confirm by pressing »Select/i«.
e
4 Select the option »Software Up g rade«
with » ­ Tuning/Skip­
r
pressing »Select/i«.
– A confirmation message is displayed.
5 Select the option »Yes« with
«.
e
– Display: »Waitin g «.
Note:
To cancel the function select the option »No«
7
by pressing »
6
Start the update program on the PC.
7 Once the software is updated successfully, re-
move the device from the PC.
­Tuning/
r
« and confirm by
e
»Tuning/Skip­
­Tuning/Skip«.
r