Classic Series Factory Panels And Kits; Classic Series Custom Panels - KitchenAid Architect Série Guide D'installation

Réfrigérateur encastrés côte à côte
Masquer les pouces Voir aussi pour Architect Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Classic Series Factory Panels and Kits

All factory parts are available through your KitchenAid dealer or
by calling KitchenAid Parts and Accessories at 1-800-442-9991.
In Canada, call 1-800-807-6777.
Factory Door Panel Kits
Four kits containing colored acrylic or stainless steel door and
top grille panels are available. Follow the kit instructions for
installing the panels.
NOTE: Panel kits are not required for factory-installed stainless
steel panel models.
Door Panel Part Numbers for Non-dispenser Models
Color
36 in. (91 cm)
White
#2220852
Black
#2220855
Stainless
#2220861
Steel
Door Panel Part Numbers for Dispenser Models
Color
36 in. (91 cm)
White
#2220864
Black
#2220867
Stainless
#2220873
Steel
Extended Door Handle Kits
Use extended door handles when additional finger clearance is
needed between the door handles and custom panel. Follow the
kit instructions for installing the door handles.
Color
White
Black
Stainless Steel
Matte Aluminum
42 in. (106 cm)
48 in. (122 cm)
#2220853
#2220854
#2220856
#2220857
#2220862
#2220863
42 in. (106 cm)
48 in. (122 cm)
#2220865
#2220866
#2220868
#2220869
#2220874
#2220875
Part Number
#4387990
#8171418
#4388062
#4387989

Classic Series Custom Panels

If you plan to install custom wood panels, you will need to create
the panels yourself or consult a qualified cabinetmaker or
carpenter. See dimensional drawings for panel specifications.
IMPORTANT: Panels weighing more than recommended may
cause damage to your refrigerator.
NOTE: Dimensions shown have a (±) ¹⁄₁₆ in. (1.5 mm) tolerance.
Panels that are more than ¹⁄₄ in. (6 mm) thick must be routed. If
panels are less than ¹⁄₄ in. (6 mm) thick, install a filler panel
between the doors and decorative panels.
Top Grille Panel
The top panel SHOULD NOT WEIGH more than 10 lbs. (4.5 kg).
A
Model
36 in. (91 cm)
42 in. (106 cm)
48 in. (122 cm)
Door Panels for Non-dispenser Models
The freezer panel SHOULD NOT WEIGH more than 30 lbs.
(13.5 kg). The refrigerator panel SHOULD NOT WEIGH more
than 50 lbs. (23 kg).
A
70
(179 cm)
Model
A
36 in. (91 cm)
14¹⁄₄ in. (36 cm)
42 in. (106 cm)
16³⁄₄ in. (43 cm)
48 in. (122 cm)
19¹⁄₄ in. (49 cm)
7¹⁄₄"
(18.4 cm)
A
35³⁄₈ in. (90 cm)
41³⁄₈ in. (105 cm)
47³⁄₈ in. (120 cm)
B
7
/
"
16
B
19¹⁄₄ in. (49 cm)
22³⁄₄ in. (58 cm)
26¹⁄₄ in. (67 cm)
11

Publicité

Table des Matières
loading

Table des Matières