Additional Notes; If You Smell Gas - Whirlpool ACMT 6332/IX/1 Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

ONLY FOR SOUTH AFRICA

Important: Read these instructions for use carefully so as to familiarize yourself with the appliance

before connecting it to its gas container. Keep these instructions for future reference.

• Turn off gas supply at bottle

• Extinguish all naked flames

• Do not operate any electrical appliances

• Ventilate the area

• Check for leaks as detailed in this manual

If odour persists, contact your dealer or gas supplier immediately.

Do not tamper or modify the appliance.

BURN-BACK (FIRE IN BURNER TUBE OR CHAMBER)

In the event of a burn-back, where the flame burns back to the jet, immediately turn the gas supply

off at the control valve on the panel. After ensuring the flame is extinguished, wait for I minute and

re-light the appliance in the normal manner. Should the appliance again burn back, close the control

valve and call a service technician. Do not use the appliance again until the service technician has

declared that it is safe to do so.

This appliance requires an operating pressure of 2,8 kPa at the appliance. This appliance is set as

NG, a suitable LPG regulator, that complies with the requirements of SANS 1237, must be

installed.

IMPORTANT INFORMATION FOR THE USER

This appliance may only be installed by a registered SAQCC Gas installer. All registered installers

are issued with a card carrying their registration number. Ask to be shown the card before allowing

the installation work to commence and make a note of the Installer registration number. Upon

completion of the installation, the installer is required to explain the operational details of the

appliance together with the safety instructions. You will be asked to sign acceptance of the

installation and be provided with a completion certificate. You should only sign for acceptance of

the installation when the installation is completed to your satisfaction.

Note that your invoice is required in the event that you wish make a guarantee claim.

IMPORTANT INFORMATION FOR THE INSTALLER

This appliance may only be installed by a gas installer registered with the South African qualification

and certification committee (SAQCC). The appliance must be installed in accordance with the

requirements of SANS 10087-1for use with LPG, SANS 827 for use with NG and any fire

department regulations and/or local bylaws applicable to the area. If in doubt, check with the

relevant authority before undertaking the installation. Upon completion of the installation you are

required to fully explain and demonstrate to the user the operational details and safety practices

applicable to the appliance and the installation.

Table of burner and nozzle specifications

Table1 (for Poland)

Burner

Diameter

(mm)

Fast (Large)(R)

100

Semi Fast

(Medium)(S)

Auxiliary (Small)(A)

Supply Pressures