Safety Instructions; Operating Safety; Electrical Safety - Royal Sovereign RWD-1750S Guide D'utilisation

Distributeur d'eau à chargement par le bas
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

SAFETY INSTRUCTIONS

Warning: Please read all of the instructions before use
To reduce the risk of fire, electrical shock, or injury when using your water dispenser, follow these basic precautions:
• Read all instructions before using the water dispenser.
• Never clean parts with flammable fluids. The fumes can create a fire hazard or explosion.
• Do not store or use gasoline or any other flammable vapors and liquids in the vicinity of this or any other water dispenser.
The fumes can create a fire hazard or explosion.

Operating Safety

• Before operating the water dispenser to the power source, let it stand upright for approximately 2 hours. This will reduce
the possibility of a malfunction in the cooling system from handling during transportation.
• Use only 3 or 5 gallon water bottles.
• Keep gasoline or any other flammable vapors and liquids away from the water dispenser.
• Clean up any spills that may occur.
• This water dispenser dispenses hot water at a high temperature range which could cause bodily harm. Extreme caution
should bused when dispensing hot water.
• Never lift or carry the water dispenser by the water taps or with bottle installed. Such action may damage the taps and will
void the product warranty.
• This water dispenser is intended for water dispensing only. Do not use other liquids.
• For indoor use only.
• Do not place water dispenser in an enclosed space or cabinet
• Never allow children to dispense hot water without proper and direct supervision. Unplug unit to prevent unsupervised use
by children.

Electrical Safety

• This water dispenser should be properly grounded for your safety. The power cord of this water dispenser is equipped with
a three prong plug and should only be used with three prong wall outlets to minimize the possibility of electrical shock.
• Plug the water dispenser into an exclusive properly installed-grounded wall outlet. Do not under any circumstances cut or
remove the third (ground) prong from the power cord.
• This water dispenser requires a standard 110/120-volt. 60Hz electrical outlet with three-prong ground.
• The power cord should be secured behind the water dispenser and not left exposed or dangling to prevent accidental injury.
• Do not use an adapter plug or extension cord with this water dispenser.
• To protect against electric shock, do not immerse cord, or any other part of the water dispenser in water or othe liquids.
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged; have it
replaced by a licensed electrician.
-2-

Publicité

Table des Matières
loading

Table des Matières