Basic Settings; Setting Mode - IKEA LAGAN Mode D'emploi

ENGLISH

Basic settings

Num‐ Settings
ber
1 Water softener
2 Rinse aid emp‐
ty notification
3 End sound
4 Auto door open On / Off
5 Key tones
1) Factory setting.
2) Do not use salt at this level.
When the appliance is in setting mode, the
indicators on the control panel represent
available settings. For each setting, a
dedicated indicator flashes:
4
1 3

Setting mode

Button
Previous button. Press to switch between the ba‐
sic settings and to change their values.
OK button. Press to enter the selected setting
and to confirm changing its value.
Next button. Press to switch between the basic
settings and to change their values.
Setting Water hardness
value
mmol/l German de‐
grees (°dH)
10 8.4 - 9.0 47 - 50
9 7.6 - 8.3 43 - 46
8 6.5 - 7.5 37 - 42
7 5.1 - 6.4 29 - 36
6 4.0 - 5.0 23 - 28
1)
3.3 - 3.9 19 - 22
5
4 2.6 - 3.2 15 - 18
3 1.9 - 2.5 11 - 14
2 0.7 - 1.8 4 - 10
2) <0.7
1
On / Off
On / Off
On / Off
5
2
Description
To download the full version visit www.ikea.com
How to change a setting
1. Press and hold simultaneously
setting mode.
• The light related to
indicator
• The indicators
• The lights related to the programme
buttons are on.
2. Press Previous or Next until the
indicator related to the selected setting
flashes.
<4
The light related to
setting value:
• For the settings with two values (on
and off), the light is either on (= the
setting is on) or off (= the setting is
off).
• For the settings with multiple values
(levels), the light flashes. The number
of flashes indicates the current
setting value (e.g. 5 flashes + pause
+ 5 flashes... = level 5).
3. Press OK to enter the setting.
• The indicator related to the setting is
on.
• The other indicators are off.
• The light related to
current setting value.
4. Press Previous or Next to change the
value.
5. Press OK to confirm the setting value.
• The new setting value is saved.
• The appliance returns to the basic
settings list.
6. Press and hold simultaneously
setting mode.
The appliance switches to the programme
selection.
for about 3 seconds to enter
flash.
, and
indicates the current
for about 3 seconds to exit the
7
and
and the
are on.
indicates the
and