Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
See sections 7, 8, and 9 for details on field wiring and setting DIP switches of AHU Control Box. After set
up of the AHU control box is complete (attaching field wiring, setting DIP switches, etc) place the cover on
the AHU control box and attach the lanyard as shown in Figure 4.2.3.
NOTE
• AHU Control Box must be installed in vertical position.
Specifications are subject to change without notice.
PAC-AH001-1
③
①
① Control Box Cover
② Screw (factory installed)
③ Lanyard
Fig 4.2.3
20
②
Publicité
Table des Matières
