Cleaning Milk Island - Saeco Milk Island MKI001 Mode D'emploi

CLEANING
14

CLEANING MILK ISLAND

Warning: do not immerse the Milk Island base in any liquid. Maintenance and cleaning
operations of the base can only be carried out when the machine is cold and disconnected
from the power supply. Do not remove the cover from the emulsifying group.
Do not use sharp objects or harsh chemical products (solvents) for cleaning. Use a soft cloth (not
dampened with water) to wipe the base. Do not dry the machine and/or its components using a
microwave and/or conventional oven.
1
Remove the jug from the base.
Remove the emulsifying group
from the jug.
4
Wash the jug with hot water.
7
Wash the tube with hot water.
Clean the coupling with a damp cloth.
For thorough cleaning, fi ll the clean jug with water and dispense steam.
The jug and the emulsifying group's components can be sterilised with a 5% sodium hypochlorite solution.
Their sterilisation is compulsory if they are not used for a long period of time.
2
Remove the valve from the
emulsifying group.
5
Wash the emulsifying group
with hot water.
3
Remove the suction tube from
the emulsifying group.
6
Carefully clean the valve with
water.
Re-assemble all the cover compo-
nents. Replace the emulsifying group
on the jug; pay attention that the
cover is correctly inserted in the tube
located inside the jug.