Table des Matières
Publicité
ABOUT
CARE & MAINTENANCE
Do not allow water residues to come into prolonged contact with the surface finish. After each use, gently dry the product surface with
a clean soft cloth to prevent water-spotting and mineral build-up. Water stains and accumulation of minerals weaken the protective
coating, eventually leading to peel off.
Clean the surface regularly using a pH neutral clear liquid soap, water and a soft cloth. Rinse away any traces of soap and gently dry
with a soft clean cloth. Occasional application of Flitz Faucet Wax Plus is also recommended. The application of this wax based product
leaves a protective layer that repels water, thereby providing extra protection against tarnishing.
Avoid
abrasive
and
harsh
organic solvents, lime scale and clog removers, brass and silver cleaners, etc.). The use of these products can damage the finish and
will void the warranty. We recommend covering the fixture with a towel when using any of the listed products in order to prevent
damage by splashing.
Residues left by personal products such as soap, toothpaste and shampoo can damage the finish. Always rinse these residues away
with clean water and wipe dry.
Due
to
the
characteristics
warranty for custom finish products is three (3) years. There are no returns on custom finish products.
OPTIONAL LOW FLOW AER ATORS
Adjustments for specific restrictions can be made on most of our lavatory bathroom faucets in order to coordinate with
regional flow rate allowances. A low flow restrictor is sold at $10 per unit. Please contact your local Aquabrass representative for
additional details.
PRODUC T CERTIFICATION
Complying with North American plumbing standards and guaranteeing environmental products of the highest quality is our top priority.
cleaning
products
(detergents,
of
the
Aquabrass
custom
caustic,
acidic,
antibacterial,
finishes
and
their
appropriate
ammonia-
or
bleach-containing
maintenance
durability
dependency,
products,
the
Publicité
Table des Matières
