Care & Maintenance; Product Certification - aquabrass Cura Serie Guide D'installation

Cura
recessed rainhead
tête de pluie encastrée
ABOUT
CARE & MAINTENANCE
Do not allow water residues to come into prolonged contact with the sur face finish. Af ter each use, gently dr y the product sur face with a
clean sof t cloth to prevent water-spot ting and mineral build-up. Water stains and accumulation of minerals weaken the protective coating,
eventually leading to peel of f.
Clean the sur face regularly using a pH neutral clear liquid soap, water and a sof t cloth. Rinse away any traces of soap and gently dr y with
a sof t clean cloth. Occasional application of Flit z Faucet Wax Plus is also recommended. The application of this wax based product leaves
a protective layer that repels water, thereby providing ex tra protection against tarnishing.
Avoid abrasive and harsh cleaning products (detergents, caustic, acidic, antibacterial, ammonia- or bleach- containing products, organic
solvents, lime scale and clog removers, brass and silver cleaners, etc.). The use of these products can damage the finish and will void the
warrant y. We recommend covering the fix ture with a towel when using any of the listed products in order to prevent damage by splashing.
Residues lef t by personal products such as soap, toothpaste and shampoo can damage the finish. Always rinse these residues away with
clean water and wipe dr y.
Due to the characteristics of the Aquabrass custom finishes and their appropriate maintenance durabilit y dependency, the
warrant y for custom finish products is three (3) years. There are no returns on custom finish products.

PRODUCT CERTIFICATION

Complying with North American plumbing standards and guaranteeing environmental products of the highest quality is our top priority.
37 aquabrass.com
last revision: 22/06/2022