Manuels Connexes pour aquabrass TOTEM 3105
Sommaire des Matières pour aquabrass TOTEM 3105
- Page 1 Installation Guide Guide d’installation TOTEM 3105 3/4” Thermostatic Valve 5-Way Diverter Valve thermostatique 3/4” avec déviateur à 5 voies aquabrass.com...
- Page 2 Totem 3105 3/4” thermostatic valve valve thermostatique 3/4” Service parts / Schéma des pièces Round trim Plaque décorative ronde Handles (not included) Poignées (non incluses) Notes: Trims sold separately / Plaques décoratives vendues séparément Item Code English Français ABCA03190 diverter cartridge cartouche du déviateur...
- Page 3 Totem 3105 3/4” thermostatic valve valve thermostatique 3/4” General dimensions / Dimensions générales Totem 3105 152.63 6" Finished wall 1/2” NPT (Outlet) Mur de nition 1/2” NPT (Sortie) 242.50 4 1/2" 9 9/16" 3 1/8" 3/4” NPT Inlet (COLD) 3/4” NPT Inlet (HOT) Entrée 3/4”...
- Page 4 Totem 3105 3/4” thermostatic valve valve thermostatique 3/4” Installation Wall setup Préparation du mur Determine the valve location in the wall. For an optimal installation, position the valve in between 2x4 studs, with plywood backing. Fix the valve onto the plywood backing with wood screws Srew (not supplied) (Fig.1).
- Page 5 Totem 3105 3/4” thermostatic valve valve thermostatique 3/4” Water connection Raccordement d’eau Connect the hot and cold water inlets at the bottom of the valve and all 5 mixed water oulets. The hot water inlet must always be connected on the left side of the...
- Page 6 Totem 3105 3/4” thermostatic valve valve thermostatique 3/4” Cleaning the filters Nettoyage des filtres Remove all handle components and the trim (4 to 10) (Fig.5). Shut off your main water supply and proceed with removing the check-valve stops (11). To clean the filters, soak them in a vinegar and water solution to remove any lime build-up.
- Page 7 Totem 3105 3/4” thermostatic valve valve thermostatique 3/4” Servicing the cartridges Remplacement des cartouches FOR 3105 VALVE / POUR LA VALVE 3105 Shut off both check-valve stops or your main wa- ter supply. Release the remaining water pressure by opening the shut-off valve.
- Page 8 Care Entretien To clean your Aquabrass faucet or accessories, wash with a wet nonabrasive soapy cloth. Then wipe dry with a soft towel or cloth. We recommend this be done on a regular basis. DO NOT USE ANY ABRASIVE, CHEMICAL OR CORROSIVE, POWDER OR ANY OTHER STRONG CLEANERS INCLUDING DETERGENTS, WINDOW CLEANERS AND DISINFECTANTS ON YOUR Aquabrass PRODUCT as they will destroy the finish and therefore VOID THE WARRANTY.
- Page 9 - Aquabrass polished chrome and brushed nickel finishes are warranted for the life of the product to the original purchaser. All other finishes will be waranted for five years (Satin Nickel Natural [#210] is designed to develop a patina over time). Raw Brass (#400) is a living finish for which there is no warranty.
- Page 10 Totem 3105 3/4” thermostatic valve valve thermostatique 3/4” last revision: 6/8/2017 aquabrass.com...