Installing Your New Appliance; Ventilation Of Appliance; Leveling Of Appliance - FAR R2620WDW Manuel D'utilisation

ENGLISH

INSTALLING YOUR NEW APPLIANCE

Before using the appliance for the first time, you
should review the following tips.

Ventilation of appliance

In order to improve efficiency of the
cooling system and save energy, it is necessary to
maintain good ventilation around the appliance.
For this reason, sufficient clear space should be
available around the refrigerator. It is advisable
for there to be at least (50~70)mm of space from
the back to the wall, at least 100mm from its
top, at last 100mm from its side to the wall and
a clear space in front to allow the doors to open
135°. Please see the following diagrams.

Leveling of appliance

• For sufficient leveling and air circulating in the
lower rear section of the appliance, the bottom
feet may need to be adjusted.
• You can adjust them manually using a suitable
spanner.
GB-16
To allow the doors to self-close, tilt the top
backwards by about 10mm.
Note: This appliance performs well within
the climate class from N to ST showed in the
table below. It may not work properly if left at a
temperature above or below the indicated range
for a long period.
Climate class Ambient temperature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
• Stand your appliance in a dry place to avoid
moisture damage.
• Keep the appliance out of direct sunlight, rain
or frost. Stand the appliance away from heat
sources such as stoves, fires or heaters.
ENGLISH
GB-17