ENGLISH
Installation
Impor tant! For electrical connection carefully follow the
instructions given in specific paragraphs�
• Unpack the appliance and check if there are damages on it�
Do not connect the appliance if it is damaged� Report possible
damages immediately to the place you bought it� In that case
retain packing�
• It is advisable to wait at least four hours before connecting the
appliance to allow the oil to flow back in the compressor�
• Adequate air circulation should be around the appliance,
lacking this leads to overheating� To achieve sufficient
ventilation follow the instructions relevant to installation�
• Wherever possible the spacers of the product should be
against a wall to avoid touching or catching warm parts
(compressor, con- denser) to prevent possible burn�
• The appliance must not be located close to radiators or
cookers�
• Make sure that the mains plug is accessible after the
installation of the appliance�
Service
• Any electrical work required to do the servicing of the
appliance should be carried out by a qualified electrician or
competent person�
• This product must be serviced by an authorized Service Center,
and only genuine spare parts must be used�
Energy saving
• Don't put hot food in the appliance;
• Don't pack food close together as this prevents air circulating;
• Make sure food don't touch the back of the compartment(s);
• If electricity goes off, don't open the door(s);
• Don't open the door(s) frequently;
• Don't keep the door(s) open for too long time;
• Don't set the thermostat on exceeding cold temperatures;
• Some accessaries, such as drawers, can be removed to get
larger storage volume and lower energy consumption�
Packaging materials
The materials with the symbol are recyclable� Dispose the
packaging in a suitable collection containers to recycle it�
Disposal of the appliance
1� Disconnect the mains plug from the mains socket�
2� Cut off the mains cable and discard it�
ENGLISH