ENGLISH
the installation is completed.
Warning!
1. Be careful not to press on the head.
2. When fitting the water tank, ensure the head
inserted into the hole first.
Filling water
1. Open the water supply inlet cover from the
left side.
2. Fill the water.
Caution!
• Fill with water up to 2.5L (which is
suggested), and not above the level. Otherwise,
GB-24
it may overflow when the lid is close.
• Other beverage (milk, juice, carbonated
beverage etc.) is not suggested to be used than
potable water. Especially beverage including
grain must not be used (may result in failure).
• Hot water cannot be filled into the water tank
directly.
Warning!
Don't touch other parts of the appliance when
filling water, it may cause the water leakage.
Dispensing water
1. Make sure the cover of the water tank is
fitted on.
2. Close the fridge door and check the
dispenser.
Water Dispensing
unlock lock
Before you dispense the water, make sure the
lock device is on left side,it is meaning unlock
situation.
Warning!
The lock is defined as "child lock".
Don't push the dispenser lever forward strongly,
ENGLISH
GB-25