FAR R2620WDW Manuel D'utilisation page 49

ENGLISH
13. Transfer the lower door to the property
position, adjust the lower hinge part, make
the hinge axis into the lower hole of the
lower door, then tight the bolts.
14. Upturn the middle hinge part the direction
180 degree, transfer it and adjust its position,
make the middle hinge axis into the upper
hole of the lower door, tight the bolts.
15. Transfer the upper door to the appropriate
position. Secure the door's level, make the
middle hinge axis into the lower hole of the
upper door.
GB-38
middle hinge part
self tapping screws
16. Transfer the upper hinge part and make the
upper hinge axis into the upper hole of the
upper door, and adjust the position of the
upper door (please support the upper door
with your hand when doing it), fixing the
upper hinge part with the special flange self-
tapping screws.
upper hinge part
17. Install the screw hole cover on the top right
corner of the refrigerator. Install the upper
hinge cover (which is in the plastic bag) on
the left corner. Put the other upper hinge
cover into the plastic bag.
ENGLISH
GB-39