Interior Cleaning; Door Seals Cleaning; Replacing The Led Light - FAR R2620WDW Manuel D'utilisation

ENGLISH
solvent such as Benzene for cleaning. They
may damage the surface of the appliance and
may cause fire.

Interior cleaning

• You should clean the appliance interior
regularly. Wipe the inside of the fridge freezer
with a weak solution of bicarbonate of soda,
and then rinse with warm water using a
wrung-out sponge or cloth. Wipe completely
dry before replacing the shelves and baskets.
Thoroughly dry all surfaces and removable
parts.
• Although this appliance automatically
defrosts, a layer of frost may occur on the
freezer compartment's interior frequently or
kept open too long. If the frost is too thick,
choose a time when the supply of food stocks
are low and proceed as follows:
1. Remove existing food and accessories
baskets,upper hinge cover (left) screw hole
cover unplug the appliance from the mains
power and leave the doors open. Ventilate the
room thoroughly to accelerate the thawing
process.
2. When defrosting is completed, clean your
GB-42
freezer as described above. Caution! Don't
use sharp objects to remove frost from the
freezer compartment. Only after the interior
is completely dry should the appliance be
switched back on and plugged back into the
mains socket.

Door seals cleaning

Take care to keep door seals clean. Sticky food
and drinks can cause seals to stick to the cabinet
and tear when you open the door. Wash seal
with a mild detergent and warm water. Rinse
and dry it thoroughly after cleaning.
Caution! Only after the door seals are
completely dry should the appliance be powered
on.

Replacing the LED light:

Warning: The LED light should be replaced by a
competent person! If the LED light is damaged,
contact the customer helpline for assistance.
Defrosting
Why defrosting
• Water contained in food or getting into
air inside the fridge be opening doors may
form a frost layer inside. It will weaken the
ENGLISH
GB-43