FAR R2620WDW Manuel D'utilisation page 48

ENGLISH
8. Place the lower door on a smooth surface
with its panel upwards. Loose screw ® and
part ®, then Install them to the left side and
tighten securely.
1. Stop block
2. Self-tapping screw
9. Change screw hole covers on middle cover
plate from left to right (as shown in figure
below).
screw hole covers screw hole covers
10. Lay the refrigerator on soft foam packaging
or similar material. Remove both adjustable
bottom feet parts, and remove the front
feet board and the lower hinge part by
unscrewing the special flange self-tapping
screws.
GB-36
1. Lower hinge part (right)
2. Front feet fixed board
3. Adjustable bottom feet part
4. Self-tapping screws
11. Unscrew the bottom hinge axis and remove it
to the hole which is side by side and screw it.
washer
Note: washer may stick to lower door
12. Replace the lower hinge part to the left side
and fixing it with the special flange self-
tapping screws. Replace the front feet fixed
board to another side and fixing it with the
special flange self-tapping screws. Install the
adjustable bottom feet parts.
Lower hinge
part (left)
front feet fixed board
ENGLISH
GB-37