FAR R2620WDW Manuel D'utilisation page 47

ENGLISH
your hand when doing it).
right upper hinge part
4. Remove the upper hinge axis, transfer it to
reversed side and tighten securely, then put it
in a safe place.
5. Remove the upper door from the middle
hinge by carefully lifting the door straight up.
NOTE: When removing the door, watch for
washer(s) between the center hinge and the
bottom of the freezer door that may stick to the
door. Do not lose.
6. Place the upper door on a smooth surface
GB-34
special flange self
tapping screws
with its panel upwards. Loose screw ® and
part ®, then Install them to the left side and
tighten securely.
1. Stop block
2. Self-tapping
screw
7. Unscrew the two special flange self-tapping
screws which are used for fixing the middle
hinge part, then remove the middle hinge
part that hold the lower door in place.
NOTE: When removing the door, watch for
washer(s) between the center hinge and the
bottom of the freezer door that may stick to the
door. Do not lose.
middle
hinge part I
special flange
self tapping
screws
ENGLISH
GB-35