The Use - Montiss TYPHOON CVC5758M Mode D'emploi

THE USE
Before use
Check the device for damage before each use. Do not use the device if the power cord or the
device is damaged or not working properly.
The use
Warning: do not use the device without all filters and the dust container in place.
1. Pull the power cord to a length between the yellow and red mark.
Note: do not pull the power cord to the red mark. This may damage the device.
2. Insert the plug into an electrical outlet.
3. Attach the floor brush or one of the accessories to the telescopic tube.
4. Turn on the device by pressing the on/off switch.
Note:
• Do not vacuum anything burning or smoking, like cigarettes, matches or hot ashes.
• Do not try to vacuum liquids or moist materials of any kind as there will be a high risk of
electric shock.
• Do not vacuum any sharp objects, like glass or nails.
• Do not use the vacuum cleaner to drain away toner content from printers of copying
machines.
Adjusting the suction power
The handle is equipped with a sliding button which allows for the adjustment of the suction power.
All manuals and user guides at all-guides.com
Floor brush:
The floor brush features a switch, which allows you to set the
bristles in or out.
Position 1: bristles are out. This setting is suitable for hard floors
(wood, laminate, tiles, stone, etc.).
Position 2: bristles are in. This setting is suitable for carpets, rugs and
soft floor covering.
Hard floor brush:
The hard floor brush is suitable for all kinds of hard floors.
Integrated 2‐in‐1 nozzle:
The 2‐in‐1 nozzle is suitable for sofas, wall surfaces, curtains, corners
and hard to reach places. The 2‐in‐1 nozzle can be attached to the
telescopic tube or directly to the handle.
21