Elica NIKOLATESLA ONE HP BL F 83 Prescriptions De Montage Et Mode D'emploi page 66

Automatic hood mode with SNAP®
For information on how to make the connection between the
hood and SNAP®, see the manual supplied with SNAP® or
visit www.elica.com.
Note: SNAP® is an auxiliary extraction unit able to operate at
the same time as the hood.
To activate this function:
Briefly press (7) , the LED "
"SNAP" (21) will light up to indicate that the hood is working in
this mode.
" (18) and the LED
The suction surface is designed to be used in
combination with a Window sensor KIT (not provided by
the manufacturer)
When installing the Windows sensor KIT (only in the case of
use of the surface in SUCTION mode), the suction will stop
operating every time when the KIT which with the surface is
equipped detects that the window is closed in the room where
it is installed.
It is recommended the purchase of the FDS KIT - 100
Elektrotechnik Schabus, available at authorised Elektrotechnik
Schabus centres or directly on the Internet site
www.elektrotechnik-schabus.de.
- The electrical connection of the suction surface KIT
must be carried out by qualified and specialised technical
personnel.
- The manufacturer of the suction surface declines all
responsibility for any inconvenience, damage or fire
caused by defects and/or problems of malfunctioning
and/or incorrect installation of the KIT.
66