Elica NIKOLATESLA ONE HP BL F 83 Prescriptions De Montage Et Mode D'emploi page 64

When the timer has finished the countdown, there is an acoustic signal
(for 2 minutes, or it will stop when one of the buttons on the hob is
pressed), while the display (15) will flash, with the symbol " .
Note: on the side of the display of the cooking zone, the following
symbol will appear (19)
To switch off the Timer:
• select the cooking zone
• set the value of the timer to " " , by means of
Not: the function remains active if no other key is pressed in the
meantime.
Egg Timer
The Egg Timer function is a countdown independent of the cooking
zones (and the extraction zone). The Egg Timer is activated by
pressing (8) .
Note : to regulate the Egg Timer function, follow the same procedure
as for the Timer function.
When the timer has finished the countdown, there is an acoustic signal
(for 2 minutes, or it will stop when one of the buttons on the hob is
pressed), while the display (15) will flash, with the symbol " .
Pause
The Pause function allows to suspend any function active on the hob,
bringing the cooking power to zero.
Activation:
• press (10)
• a " " is displayed (13).
To deactivate the function:
Note :this operation restores the hob settings to those prior to the
pause.
• press (10)
• within 10 seconds scroll to the right along
the Selection bar (3), relating to the cooking zone 2
(FIG.19);
Note : if the operation is not performed within this time
the pause function will remain active.
Note: if after 10 minutes, the Pause Function is not deactivated, the
hob will turn off automatically.
Recall
The Recall function allows to recover all the hob settings, in case of
accidental shut-down.
".
Activation:
• turn the hob back on
within 6 seconds after shut-down
• press "
within the next 6 seconds
Automatic Heat UP
The Automatic Heat UP function allows to reach the set power faster;
with this function it is possible to cook food faster, but without the risk of
burning it, because the temperature does not exceed the set level.
This function is available for the levels of power 1 -8 .
Activation:
• press and hold, on the Selection bar (3), the desired power
• a " " is displayed (13).
Power Limitation
The Power Limitation function allows the product to be used while
limiting its maximum absorption.
Note : the limit must be set when the hob is off, without pressing
".
within 2 minutes from when the hob is connected to the electrical
network, or from when the electrical network itself is reconnected.
To set the Power Limitation:
- press and hold keys
- slide along sliders FL and RL
time, from left to right,
and press down at the letters P, until a short acoustic signal sounds
the Timer display (15) shows the symbols "CF6", to indicate that
it can be set
the FL zone display shows the current setting**
0 = 7.4 KW
1 = 4.5 KW
** by default, the limit is set to 7.4 KW
- to change the Power Limitation setting slide on the FL slider
- from left to right to increase the Kw
- from right to left to decrease the Kw
- to save the selection, press the keys
an acoustic signal will sound to confirm the setting and the function will
close.
64
"
, until an acoustic signal sounds
,
at the same
, for 1 second;