CLAS OE 6047 Mode D'emploi page 11

OE 6047
HOT AIR GUN 50-650°C
Personnal safety
• stay alert, watch what you are doing and use common sense when operating a power tool. Do not use
a power tool while you are tried or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
• use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety
shoes, hand hat, or hearing protection used whenever conditions require will reduce personal injuries.
• avoid accidental starting. Ensure the switch is in the off position before plugging in.
Carrying power tools with your finger on the switch or plugging in power tools that have the switch on
invites accidents.
• remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal injury.
• do not overreach. Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
• dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
• if devices are provided for the connection of dust extraction and collection facilities, ensure these are
connected and properly used. Use of these devices can reduce dust related hazards.
Power tool use and care
• do not force the power tool. Use the correct power tool for your application. The correct power tool will
do the job better and safer at the rate of which it was designed.
• do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
• disconnect the plug from the power source before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
• store idle power tool out of the reach children and do not allow persons unfamiliar with the power tool
of these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• maintain power tools. Check for misalignment or sticking of moving parts, breakage of parts and other
condition that may affect the power tool's operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
• use the power tool, accessories and tool bits etc., in accordance with these instructions and in the manner
intended for the particular type of power tool, taking into account the working conditions and the work
to be performed. Use of the power tool for operations different from intended could lead to a hazardous
situation.