Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1
Installing the spout
Installation du bec
cap
setscrew
vis
spout/ bec
top shank
holder
shank
A. First of all, make sure you have three holes in your deck installation AND
FOR THE FUTURE MAINTENANCE, KEEP ALWAYS AN AVAILABLE ACCESS
TRAP.
B. Remove the aerator.
C. Remove the cap and unscrew the setscrew and take off the shank. Remove
the top shank holder from the shank body, (Fig.1).
D. From under the deck, insert the shank body through the hole and tighten
back firmly the top shank holder from the top, (Fig.2).
E. Put back the spout and secure it with the setscrew.
last revision: 09/13/2022
aerator
top shank
holder
shank
body
Fig.1
madison 86013
3-piece tub filler with handshower
robinet de bain 3 morceaux avec douchette
2
thread
rod
threaded
rod
rubber washer
metal
washer
metal nut
rubber
washer
metal washer
Fig.2
A. Take the mixer and indentify the
connections at the bottom as shown,
(Fig.3).
B. At the bottom, connect the hot
and cold water hoses as shown. Next
connect the mixed water hose and
the threaded rod, (Fig.4).
C. Insert the mixer with threaded rod
and the hoses onto the hole of your
deck. Then secure the mixer with tie-
down kit (washer & nut) as shown.
4
Installing the mixer
Installation du robinet
mixed
water
cold
hot
water
water
Fig.3
mixer
mixed
water
metal nut
hot
aquabrass.com
cold
Fig.4
Publicité
Table des Matières
