KTM 76912968044C1 Manuel D'instructions page 21

–
Mount the bottom mounting bushings
6
screw and washer
The bottom mounting bushings
bearer and the crash bar.
–
Mount the nut of the original screw cap
(included) and tighten the screw cap.
Guideline
Screw cap, crash bar
501969-01
–
Tighten all screws
Guideline
Screw, crash bar
501970-01
Final steps
–
Remove the motorcycle from the lift stand (see Owner's
Manual).
3
with cap head
7
(all included).
3
lie between the engine
bk
with washer
M10 45 Nm (33.2 lbf ft)
5
.
M10x40 45 Nm (33.2 lbf ft)
ASSEMBLY 5
7
9