GoodHome bamia GHIHAC60 Installation page 37

EN Use
PL Użytkowanie
STAGE C
1. Now touch the Hood connection button
2. The hob will briefly show a connected message to indicate that the hob is now locked with the hood and the
pairing process is complete. The hood will also show the double "A" symbols in its control panel to indicate
pairing is complete.
IMPORTANT: Once the hob and hood are paired and locked together you can now choose to use your
GoodHome appliances in three ways, Independent Control, Semi-Automatic Control and Automatic Control.
1. Independent Control - The Hood connection button on the hob is OFF
and you can operate the hood's fan and extraction manually as required
independently of any settings on the hob.
2. Semi-Automatic Control - The Hood connection button on the hob is ON
and you can control the hood's fan and extraction manually from the 360°
Master Control Key on the hob control panel.
3. Automatic Control - The Hood connection button on the hob is ON and the
hob will control the hood's fan and extraction based upon the power levels
in use on the hob.
NOTE: You do not need to complete the pairing process again if you switch off the Hood connection on the hob. The link is
stored in memory and will be reactivated once you have switched Hood connection back on.
NOTE: If you touch the Cooker Hood Control Panel key before connectivity is complete you will see this message on screen:
FR Utilisation
RO Utilizare
on the hob and it will turn blue.
0
Level
See your manual on how to
connect your cooker hood.
36