GoodHome bamia GHIHAC60 Installation page 36

EN Use
PL Użytkowanie
EN
Controlling a GoodHome cooker hood remotely
IMPORTANT: This section is only applicable if you have purchased a GoodHome cooker hood.
The process for connecting the hood to the hob happens in three stages:
A) Configure the hob to transmit a radio frequency signal.
B) Configure the hood to receive this signal.
C) Lock the connectivity between the two appliances and complete the pairing process.
STAGE A
1. The induction hob must be switched on and showing the Home Screen display before proceeding.
2. Touch the Main Menu key
to initiate the pairing sequence and transmit a radio frequency signal from the hob. Do not touch the Hood
connection button on the hob yet!
Settings
IMPORTANT: To proceed with the connectivity operation, the hood must be switched off at the mains
power switch. Turn on the hood again and complete Stage B and C within two minutes. If connection is not
successful, turn off the hood again, wait for one minute and try again.
STAGE B
1. When the hood is first switched on, the control panel will blink white in Settings mode.
2. Touch the Fan Speed Increase icon and Fan Decrease icon together for two seconds on the hood
control panel and both icons will turn blue and the Automatic symbol "A" will appear in the display. The hood is
configured to receive the signal.
FR Utilisation
RO Utilizare
on the Home Screen to take you to the Settings menu. Touch the Connect icon
0
Level
Connect
How to connect to hood
Hood connection
35