General Safety Notes - Matrix JS-1205C1 Guide De L'utilisateur

General Safety Notes

• Provide adequate lighting in the
workplace.
• Use the clamping device to secure the
work piece.
• Follow the instructions for changing
cutting accessories.
• Keep handles dry and free from oil and
grease.
• Distribute the safety instructions to all
persons working on the machine.
• Keep all safety and hazard warnings
on the machine in complete and legible
condition at all times.
• Check power cords. Do not use the tool if
the power cord is damaged.
• Make sure that the machine is stable and
on solid ground.
• Take care when working: there is risk of
injury to fingers, hands and eyes.
• Keep children away from the machine
when it is plugged in.
• When the machine is being operated, all
guards and covers must be properly fitted.
• The operator must be at least 18 years
old. Apprentices must be at least 16 years
old and should be supervised when using
the machine.
• Persons working on the machine should
not be distracted.
• Keep the machine work station clear of
chips and woodwaste.
• Wear tight-fitting clothing. Take off jewelry,
rings and watches.
• Wear a cap or hairnet to protect long hair.
• The safety devices on the machine must
not be dismantled or destroyed.
• Perform refitting, adjustment,
measurement and cleaning work only when
the engine is turned off. Unplug and wait for
the rotating parts of the tool to come to a
complete standstill.
• Switch off the machine when
troubleshooting. Unplug the machine.
• Installation, repair and maintenance work
on the electrical installation may only be
carried out by qualified professionals.
• All protective and safety equipment must
be immediately re-installed after repairs
and maintenance are completed.
• Do not expose the machine to moisture
and do not use near flammable liquids or
gases.
• Take care during machine operation.
Use common sense when working. Do not
use the power tool when you are tired or
distracted.
• Never use outdoors when the general
weather and environmental conditions do
not allow it (e.g. charged atmospheres,
during a lightning storm or when it is
raining).
• Wear appropriate clothing: Do not wear
wide sleeves, scarves, neckties, necklaces,
or bracelets, which could get caught in the
moving machine parts.
• Always use personal safety devices:
appropriate regulation goggles, well-fitting
gloves, outer or inner ear protection and a
hood that covers the hair if necessary.
• Pay attention to the power cable: it must
never catch on the machine or cause the
machine to become unplugged.
Protect it from sharp edges, oil and
overheating.
• If an extension cord is needed, use only
approved products.
• Guard against electric shock: avoid
contact with grounded objects such as
pipes, radiators and refrigerators.
5
GB