Hendi 580301 Mode D'emploi page 4

Instructions for use
Weighing
• For optimal results, place the scale on a flat
surface.
• Turn on the scale by pressing the '
An "0.00" will appear on the display and the
scale is now ready for use.
• Select the desired measuring unit by pressing
the ' ' button. In this way you can choose
between lb, lb & oz, and kg.
• Set an empty bowl or container on the scale.
The display will now indicate the weight of the
bowl or container.
• Press the 'TARE' button to reset the scale to
"0.0".
Low battery
When battery is running out of power, the power indicator on the display will start blinking to alert the
user to replace batteries.
Overload
Maximum weight of the scale is 100kg, when overloaded the display will show "O-Ld". Overloading the
scale can damage the scale permanently.
EN
Technical Specification
Model
Maximum Capacity
Graduation
Power
Unit
Dimension
Warranty
Any defect affecting the functionality of the ap-
pliance which becomes apparent within one year
after purchase will be repaired by free repair or
replacement provided the appliance has been
used and maintained in accordance with the in-
structions and has not been abused or misused
in any way. Your statutory rights are not affected.
If the appliance is claimed under warranty, state
4
• Place the product to be weighed in the bowl
or container and read its weight on the display
' button, • You can weigh various products in the same
bowl by pressing the 'TARE' button after add-
ing each product, which will reset the display
to "0.0" each time. Remember not to exceed
the maximum weight of 100 kg.
• If you want to "hold" the display figure, press
the '
function, press the '
• Turn off the scale by pressing the '
• If you do not use the scale for 5 minutes, it will
shut off.
580301
100kg
50g
2 x 1.5V AAA Alkaline batteries (Included, non-rechargeable)
Kg / lb / lb,oz
300x 255 x (H) 42mm
where and when it was purchased and include
proof of purchase (e.g. receipt).
In line with our policy of continuous product de-
velopment we reserve the right to change the
product, packaging and documentation specifi-
cations without notice.
' button once. To release the "hold"
' button once again.
' button.