Hendi 208304 Mode D'emploi page 14

Note: Warranty is void if failure to de-scale regularly leads to reduced functioning or failure of the
appliance.
Technical data
Model type
Voltage
Frequency
Power
Capacity
Brewing time
Brewing temperature
Warming temperature
Paper filter
Measurements appliance lxwxh
Measurements of packaging lxwxh
Net / Gross weight
Content glass decanter
Possible problems and how to solve them
Problem
Power switch is in ON position,
but the lamp on the switch and
the in-use indicator lamp do not
light up.
Power switch is in the ON
position and the lamp on the
switch is on, but the in-use
indicator lamp does not light up.
Power switch is in the ON
position and both lamps are lit
up but the water is not passing
through the machine.
A fuse in the fuse box blows
when the appliance is turned
on.
► Empty the appliance (no water can remain in the appliance) before it is sent for reparation.
Warranty
Any defect affecting the functionality of the appliance that becomes apparent within one year after
purchase will be corrected by free repair or replacement provided the appliance has been used and
maintained in accordance with the instructions and has not been abused or misused in any way. Your
statutory rights are not affected. If the appliance is claimed under warranty, state where and when it
was bought and include proof of purchase (f.e. receipt).
In line with our policy of continuous product development we reserve the right to change the product,
packaging and documentation specifications without notice.
maximum 100 cups / hour
1.8 litres / 5-8 minutes
370x195x430 mm
460x250x480 mm
Possible cause
1. Appliance is not plugged in.
2. Power switch is broken.
1. Relay is broken.
2. Water level sensor is broken.
3. Water reservoir empty.
1. Heating element is broken.
2.
1. Short circuit.
If in doubt, always contact your supplier!
208304
230 V a.c.
50-60 Hz
2100 W
93° - 96°C
max. 80°C
90/250 mm
5.7 / 7.9 kg
1.8 litres
Solution
1. Insert plug into socket.
2. Contact your supplier for a
Contact your supplier.
3. Fill the reservoir.
Contact your supplier.
Contact your supplier.
new switch.