Siku JOSKIN Transspace 16 T Manuel D'instructions page 8

N.B.:
It is not possible to operate the trailer with the
remote control module without having con-
nected the data cable to the tractor and trailer
because the trailer does not have its own re-
ceiver unit.
B) Operation without the remote
control module
A special feature of this trailer is that the
electrical functions of "tipping" and "lights" can
also be controlled without the remote control
module. For this purpose please pull the data
cable from the socket of the battery charger –
both on the tractor and on the trailer. Set the
battery charger of the trailer to the ON posi-
tion.
The tipping function of the trailer is con-
trolled by means of a knurling wheel (Fig.
If this wheel is moved upwards the trough lifts.
If you move this wheel downwards the trough
will lower.
The switch to the right of the knurling wheel
(Fig. ) activates the rear lights. Pressing the
switch switches on the rear lights. Pressing
the switch again switches off the lights.
Caution – Risk of Death!
Never insert data cables, with or without storage battery, into a socket. Only use
original chargers to charge batteries.
The Symbols
On / Off switch
Digital proportional
speed control
Adjustable (digital
proportional)
steering
Electronically
operated rear
coupling
10
N.B.:
The flashing function cannot only be activated
via the remote control module.
Once the connection has been created bet-
ween tractor and trailer by means of the data
cable the function of the knurling wheel and of
the light switch is deactivated.
The tractor and trailer indicators do not flash
together.
).
LED's Headlights
Rear light
Working indicators
and hazard warning
lights
Remote control unit
with 4 selectable
channels
Interchangeable
rechargeable
battery
Data interface
for additional
equipment
infinitely variable
tipping function
Servo motor
Compatible with all
SIKUFARMER 1:32
products
Die-cast model scale
1:32