Sentiotec Massivsauna BASIC LARGE Instructions De Montage page 8

Assembly instructions
EN
fig. 1.18
fig. 1.19
fig. 1.20
08
13. After the door is assembled, fix the covering battens. Start
with the front covering batten on the left side next to the door,
then fix the second covering batten across the corner. (screws
3x40 - fig.1.18)
Use the same procedure for the right corner. If needed, a
covering batten is also fixed on one visible side on the back.
14. Now fix the inner and outer covering battens to the door
frame and the door side. (screws 3x40) The distance to the door
frame is approx. 12 mm on all sides. (fig.1.19)
15. Now your sauna is nearly ready. Screw the single battens
of the heater protective grille together as shown in fig. 1.20.
(screws 3x40)
The dimensions for the installation of the sauna heater can be
seen from the assembly instructions of the heater used.
The sauna heater and the controls may only be connected an
authorized electrical company.