Sentiotec Massivsauna BASIC LARGE Instructions De Montage page 7

fig. 1.13
fig. 1.14
fig. 1.15 fig. 1.16
fig. 1.17
9. For the cabin light drill a hole of approx. 10 mm through
the back wall in the upper left or right corner. After the lamp is
assembled, the covering grill is fixed with four screws across the
corner. (screws 3x40 - fig.1.13)
The lamp may only be connected by an authorized electrical
company.
10. Now put the glass door with the frame into the opening.
You can change the opening direction of the door from left to
right by turning the glass door part by 180°. The frame must be
exactly in line with the side and must not project. (screws 4x70
- fig.1.14)
11. Screw the frame with the side walls. (screws 4x70 -
fig.1.15) On the side of the hinge plate, you can screw the
frame through the middle hole of the glass door hinge plate to
the wall. (fig.1.16)
12. In order to assemble the handles slide the covering sheet on
the glass door at the height of the drilled handle holes. Insert the
plastic rings into the drilled holes of the glass door.
Take care that the recess of the handle is situated on the side of
the covering sheet. Now insert both screws through the drilled
part of the handle and screw the counterpart carefully.(fig.1.17)
07