Sentiotec Massivsauna BASIC LARGE Instructions De Montage page 6

Assembly instructions
EN
fig. 1.10
fig. 1.11
fig. 1.12
06
7. After all four battens have been assembled, you can put both
roof elements onto the battens. (fig.1.10 + fig. 1.11) Then screw
the roof elements from above. (screws 5x80)
8. Now fix the bench supporting battens. Fix the lower bench
supporting battens with a length of 4x4x100 cm at a distance
of 41 cm from the floor to the upper edge of the batten on both
the left and right sides of the glass door. (screws 4x70)
Turn the battens so that the rounded edges are visible above.
Fix the upper shorter battens with a dimension of 4x4x50 cm
at a distance of 86 cm from the floor to the upper edge of the
batten. Turn those battens so that the rounded edges are visible
below. (fig.1.12) Then put both benches onto the battens.