Basic Safety Instructions - Cloer 6750 Notice D'utilisation

Basic safety instructions

• The appliance is intended to be used in household only and using in:
- staff kitchen areas in shops, offices and other working environments,
- in farm houses,
- by clients in hotels, motels and other residential type environments,
- on bed and breakfast type environments.
• Have repairs of Cloer electronic appliances carried out only by authorized Cloer specialist
dealers or by the Cloer customer service. Improper repairs can involve substantial dangers for
the user. Furthermore, this will void your warranty claims.
• Only operate the appliance at household-usual power sockets. Check if the mains voltage
stated on the type plate is up to that of your power supply network.
• If the supply cord is damaged, it must be replaced by Cloer, its service agent or similarly
qualified persons in order to avoid a hazard.
• Pull power plug of the power socket
- in case of a defect,
- if the appliance is not used for a longer time,
- before any cleaning,
- during no supervision,
- before removing the lid.
• Do not stretch the feed cable over sharp edges and do not tighten it too tight, do not use it for
carrying and protect it from heat (hotplate, for example).
• This appliance can be used by people with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved.
• This appliance must not be used by children. Cleaning and user maintenance shall not be
made by children. Keep the appliance and its cord out of reach of children to ensure they
do not play with it.
• Do not use the appliance outdoors.
• Protect the appliance from humidity (splashing water or rain)
• More information about proper cleaning on the following pages. Do not immerse appliance in
water or any other liquids.
• Warning: Lignite or similar fuels must not be used in this device.
• The device should be operated via a residual current device (RCD) with a trigger current not
exceeding 30 mA.
• The device must be connected to a power outlet with protective ground.
• The mains connection line should be regularly inspected for signs of damage. The device must
not be used if the connection line is damaged.
• Use Barbecue Grill exclusively with the delivered connector plugs: Type 675 for Barbecue
Grill 6750
EN
7