Bebeconfort Sweet Safe Mode D'emploi page 27

• Do not use the child restraint device without the cover. Do not
replace the seat cover with a cover other than that recommended
by the manufacturer, because it will have a direct effect on the
functioning of the child restraint.
• Folding seats must always be locked in place
• After purchasing, install the seat in your vehicle. If you encounter
any installation problems due to the length of the vehicle seat
belt, contact your distributor immediately (prior to use).
• If in any doubt about the correct installation or use of the system,
the user is advised to contact the distributor or the manufacturer
of the child restraining device system.
Care
Fabric:
• Before cleaning check the label sewn into the fabric, you will find
the wash symbols indicating the method of washing each item.
Washing symbols :
eodmU
Shell:
• Clean the shell using a damp cloth.
Environment
Keep all plastic packaging materials out of reach of your child to
avoid the risk of suffocation.
For environmental reasons, when you have stopped using this
product, we ask that you dispose of the product in the proper
waste facilities in accordance with local legislation.
Questions
If you have any questions, contact your local Bébé Confort retailer
(see www.bebeconfort.com for contact information).
Make sure that you have the following information on hand:
- Serial number at the bottom of the orange ECE sticker
- Make and type of car and seat on which the Bébé Confort Sweet
Safe is used
- Age, height and weight of your child
Warranty
Our 24 months warranty reflects our confidence in the high
quality of our design, engineering, production and product
performance. We confirm that this product was manufactured in
accordance with the current European safety requirements and
quality standards which are applicable to this product, and that
this product is free from defects on materials and workmanship at
the time of purchase. Under the conditions mentioned herein, this
warranty may be invoked by consumers in the countries where
this product has been sold by a subsidiary of the Dorel Group or
by an authorized dealer or retailer.
Our 24 months warranty covers all manufacturing defects in
materials and workmanship when used in normal conditions and
in accordance with our user manual for a period of 24 months
from the date of the original retail purchase by the first end-user
customer. To request repairs or spare parts under our warranty
for defects in materials and workmanship you must present your
proof of purchase, made within the 24 months preceding the
service request.
Our 24 months warranty does not apply to defects caused by
normal wear and tear, damage caused by accidents, abusive use,
negligence, fire, liquid contact or other external cause, damage
which is the consequence of failing to comply with the user
manual, damage caused by use with another product, damage
caused by service by anyone who is not authorized by us, or if
the product is stolen or if any label or identification number has
been removed from the product or has been changed. Examples
of normal wear and tear include wheels and fabric worn down by
regular use and the natural breakdown of colors and materials due
to normal aging of the product.
What to do in case of defects:
Should problems or defects arise, your first point of contact is the
authorized dealer or retailer recognized by us. Our 24 months
warranty is recognized by them (1). You must present your proof
of purchase, made within the 24 months preceding the service
request. It is easiest if you get your service request pre-approved
27
EN