Installing Your Appliance; Electrical Connection - Beko CFB 6310 W Manuel De L'utilisateur

2

Installing your appliance

2.1 Installation
The minimum distance between the supporting
surface for the cooking equipment on the hob and
the lowest part of the range hood must be not less
than 50cm from electric cookers and 65cm from
gas or mixed cookers. If the instructions for instal-
lation for the gas hob specify a greater distance,
this must be adhered to. The template (*) can be
used for installation.

2.2 Electrical connection

The mains power supply must correspond to the
rating indicated on the plate situated inside the
hood. If provided with a plug connects the hood
to a socket in compliance with current regulations
and positioned in an accessible area, after instal-
lation.
If it not fitted with a plug (direct mains connection)
or if the plug is not located in an accessible area,
after installation, apply a double pole switch in ac-
cordance with standards which assures the com-
plete disconnection of the mains under conditions
relating to over-current category III, in accordance
with installation instructions.
8 / EN
Before re-connecting the hood ci
A
cuit to the mains supply and check-
ing the efficient function, always
check that the mains cable is co
rectly assembled.
Power cable replacement must be
A
undertaken by the authorised se
vice assistance centre or similar
qualified person.
2.3 Operation
The hood is fitted with a control panel with aspra-
tion speed selection control and a light switch to
control cooking area lights.
Hood / User Manual