American Standard 1582.000 Serie Instructions D'installation

INSTALLATION INSTRUCTIONS
DRAIN KIT
Model: 1582.000.YYY FOR FREESTANDING TUB 2691, 2692
Model: 1582.200.YYY FOR FREESTANDING TUB 2549
Thank you for selecting American Standard...the benchmark of fine quality for over 100 years. To ensure that your installation
proceeds smoothly--please read these instructions carefully before you begin.
BEFORE YOU BEGIN....
Local building codes vary by location. Observe all local plumbing and building codes.
Your new bath is shipped to you after careful inspection.
To insure maximum performance and pleasure from this product, please follow the instructions and cautions.
!
NOTE: Take extra care in handling surfaces of the bath. Use only non-abrasive cloths to avoid scratching.
TOOLS & MATERIALS MAY BE REQUIRED
TOOLS:
• Level
• Square
• Tape Measure
• Pipe Wrench
KIT INCLUDES:
OVERFLOW COVER
(NOT INCLUDED WITH 1582.200)
1
Snap "Overflow" cover into overflow of tub.
Ensure it is securely in place. (See Fig. 1)
NOTE: Skip this step for kit 1582.200
Fig. 1
OVERFLOW COVER
All product names listed herein are trademarks of AS America, Inc. unless otherwise noted.
© AS America, Inc. 2019
• Slip Joint Pliers
• Personal Safety Equipment
• Caulking Gun
MATERIALS:
• Silicone Caulking
• Tub & Tile Caulk
DRAIN
2
Install drain as shown in Fig. 2.
SILICONE
SEAL
Fig. 2
8" (203mm)
EXTENSION TAILPIECE
DRAIN COVER
SILICONE SEAL
TUB FLOOR
SILICONE SEAL
PLUG NUT
755425-100 Rev. 3 6/19