American Standard 1680100 Serie Instructions D'installation

INSTALLATION INSTRUCTIONS
DRAIN KIT
Model: 1680100.XXX FOR FREESTANDING TUB 2765, 2766, 2767
Thank you for selecting American Standard...the benchmark of fine quality for over 100 years. To ensure
that your installation proceeds smoothly--please read these instructions carefully before you begin.
BEFORE YOU BEGIN....
Local building codes vary by location. Observe all local plumbing and building codes.
Your new bath is shipped to you after careful inspection.
To insure maximum performance and pleasure from this product, please follow the instructions and cautions.
!
NOTE: Take extra care in handling surfaces of the bath. Use only non-abrasive cloths to avoid scratching.
TOOLS & MATERIALS MAY BE REQUIRED
TOOLS:
• Level
• Square
• Tape Measure
• Pipe Wrench
• Plug Wrench
KIT INCLUDES:
ALLEN WRENCH
2 SET SCREWS
CHANGE OVERFLOW COVER
1
Remove 2 set screws on existing overflow cover using
supplied Allen wrench. (See Fig. 1)
Fig. 1
All product names listed herein are trademarks of AS America, Inc. unless otherwise noted.
© AS America, Inc. 2016
• Slip Joint Pliers
• Standard Woodworking Tools
• Personal Safety Equipment
• Caulking Gun
OVERFLOW COVER
2
Replace with overflow cover included in this kit. Use Allen
wrench to tighten 2 set screws. (See Fig. 2)
Fig. 2
MATERIALS:
• Silicone Caulking
• Tub & Tile Caulk
DRAIN
755143-100 Rev. A 10/16