Subaru H001SVC000 Manuel D'installation page 4

6
PRE-ARRANGED POWER WINDOW INTERRUPT CONNECTION
1. Locate and release the vehicle's 2-pin power window
interrupt pre-fi t connectors secured to the vehicle's
wire harness with breakaway tape near the upper right
passenger's side glove box area. (FIGURE I)
NOTE: The vehicle's 12-pin pre-fi t connector will
also be secured under the same breakaway tape.
2. When the vehicle's 2-pin power window interrupt pre-fi t
connectors are free from the breakaway tape, unplug
and discard the 2-pin mating connector/wire jumper.
(FIGURE J)
3. Plug the 2-pin power window interrupt pre-fi t connectors
together to complete the circuit. (FIGURE K)
ISSUE
PART NUMBER
H001SVC000/200
DATE
-
27 Aug 2021
FIGURE I
12-Pin Pre-fi t
Connector
FIGURE J
FIGURE K
SUBARU OF AMERICA
Power Window
Pre-fi t Connectors
4 OF 10