Auto Mode Operation; Temperature Adjustment During Auto; Fan Speed - Mitsubishi Heavy Industries SRF25ZIX-S Manuel De L'utilisateur

AUTO mode operation

■ Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
Display in OFF status
• The current time and preset OPERA-
TION MODE are displayed while the
air conditioner is turned off.

Temperature adjustment during AUTO

■ Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the

FAN SPEED

■ You can choose the capacity of your air-conditioner
when heating mode, cooling mode or fan mode.
Operation capacity by your choice
Set automatically by microcomputer
Powerful operation with high capacity
Standard operation
Energy-saving operation
All manuals and user guides at all-guides.com
When the unit is not in AUTO mode:
1
Press MODE button.
Move the [
Point the remote control toward the air-conditioner, and
2
Press the ON/OFF button.
NOTE
• In case air is not blowing out during
the operation.
Page 21
• When the included clean filter is in-
stalled the air conditioner will clean
the air during automatic operation.
When a change in temperature is required.
1
Press the
When it is a little cold
Press the button.
■ Each time the
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the
When it is a little hot
Press the button.
■ Each time the
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the
Setting
-6
temp.(°C)
20
Press the FAN SPEED button.
Move the [
AUTO
FAN SPEED
AUTO
HI
MED
LO
• When changing FAN SPEED from HI to LO, the sound of
– 8 –
mark] to the (Auto) position.
To stop: Press the ON/OFF button.
AUTO mode can be
operated by simply
pressing the ON/OFF
button.
• If you do not want the AUTO mode program, change to
COOL, HEAT, DRY or FAN instead of AUTO.
• Airflow direction adjustment procedure.
or button.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not change.
button is pressed, the switch over occurs in the following order
button is pressed, the indicator does not change.
Remote Control display
+ 0
-5 -4 -3 -2 -1 +1
21 22 23 24 25 26 27
mark] to the preferred fan speed position.
HI MED LO
NOTE
refrigerant flowing may be heard.
Page 9
Page 10
button or the button.
+2 +3 +4 +5 +6
28 29 30 31 32