Temperature Settings; Accessories; The Fresh Dial - EAS ELECTRIC EMR177ASI Guide D'utilisation

3.3 Temperature Settings Warnings
• It is not recommended that you operate
your fridge in environments colder than
10°C in terms of its efficiency.
• Do not start another adjustment before
completing one adjustment.
• Temperature adjustments should be
made according to the frequency of door
openings and the quantity of food kept
inside the fridge.
• When you first switch on the appliance,
allow it to operate for 24 hours in order to
reach normal operating temperature.
During this time, do not open the door or
place a lot of food inside the appliance.
• If the appliance is switched off or unplu-
gged, wait at least 5 minutes before
plugging the appliance in or restarting it
in order to prevent damage to the
compressor.
• Your fridge is designed to operate within
specific ambient temperature ranges,
according to the climate class stated on
the information label. We do not
recommend operating your fridge out-
side the stated temperatures value limits.
• Your appliance is designed to operate in
the ambient temperature (T/SN = 10°C -
43°C) intervals stated in the standards,
according to the climate class displayed
on the information label. We do not
recommend operating your appliance
out of the stated temperature limits in
terms of cooling effectiveness.
Climate class and meaning:
• T (tropical): This refrigerating appliance is
intended to be used at ambient tempe-
ratures ranging from 16 °C to 43 °C.
• ST (subtropical): This refrigerating app-
liance is intended to be used at ambient
temperatures ranging from 16 °C to 38 °C.
• N (temperate): This refrigerating app-
liance is intended to be used at ambient
temperatures ranging from 16 °C to 32 °C.
• SN (extended temperate): This refrige-
rating appliance is intended to be used
at ambient temperatures ranging from
10 °C to 32 °C.
The Turbo Fan
Do not block the air inlet and outlet
openings when storing food, other-
wise air circulation provided by the
turbo fan will be impaired.

3.4 Accessories

Visual and text descriptions in the
accessories section may vary
according to the model of your
appliance.

3.4.1 The Fresh Dial

If the crisper is full, the fresh dial
located in front of the crisper should
be opened. This allows the air in the
crisper and the humidity rate to be
controlled, to increase the life of
food within.
The dial, located behind the shelf,
must be opened if any condensation
is seen on the glass shelf.
EN - 55
Turbo fan
Fresh dial
V.2