Using The Appliance; Display And Control Panel; Alarm Symbol (Led); Super Cooling Mode - EAS ELECTRIC EMR177ASI Guide D'utilisation

Masquer les pouces Voir aussi pour EMR177ASI:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

3 USING THE APPLIANCE

3.1 Display and Control Panel

1
Using the Control Panel
1. Fridge temperature set button
2. Super cooling symbol (Super
cooling LED)
3. Alarm symbol (Alarm LED)
4. Fridge adjusted temperature
indicator
5. 3.2 Operating your Fridge
If your product has lighting
When the product is plugged in
for the first time, the interior lights
may turn on 1 minute late due to
opening tests.
3.2.1 Fridge Temperature Set Button
This button allows setting tempera-
ture of the fridge. In order to set
values for fridge partition, press this
button. Use this button also to
activate super cooling mode.
3.2.2 Alarm symbol (Alarm LED)
In case of a problem within the
fridge, the alarm led will release red
light.

3.2.3 Super Cooling Mode

When would it be used?
• To cooling huge quantities of food.
• To cooling fast food.
• To cooling food quickly.
• To store seasonal food for a long time.
How to use?
• Press temperature set button until
super cooling light comes on.
• Super cooling led will light during this
mode.
2
3
EN - 54
4
• For optimal appliance performance
in maximum cooling capacity, set
the
appliance
cooling mode 6 hours before you
put the fresh food into the fridge.
During this mode:
If you press temperature set button,
the mode will be cancelled and the
setting will be restored from 2.
The super cooling mode will be
cancel automatically after 6 hours
or when cooling sensor tempera-
ture falls below 2°C.

3.2.4 Fridge Temperature Settings

• The initial temperature of the set-
ting display is 5 °C.
• Press fridge setting button once.
• Every time you press the button, the
setting temperature will increase. (2°
C, 4°C, 5°C, 6°C, 8°C, Super cooling)
• If you press fridge setting button un-
til super cooling symbol is displayed
on your fridge.
• Settings display and you do not
press any button within the follo-
wing 3 seconds.
• Super cooling will blink.
• If you keep on pressing, it will restart
from last value.
to
active
super
V.2

Publicité

Table des Matières
loading

Table des Matières