Technical Features - Polisport Koolah CFS Mode D'emploi

EN
SPECIFICATIONS TO ASSEMBLE YOUR CARRIER
CAUTION
How and where the carrier is to be attached to the bicycle.
4.72 - 6.89 in
120 - 175 mm
COMPATIBLE WITH RACKS
IN ACCORDANCE
WITH ISO 11243
• This carrier must not be mounted to bicycles fitted with rear
shock absorbers.
• This carrier must not be mounted to Motorized Vehicles such
as Mopeds and Scooters.
• Insure that the rack used with the Polisport product meets
ISO 11243, specifically that it can hold sustained loads of at
least 27kg/59.5 lbs.
• For safety reasons, this carrier shall only be fitted to rack in
accordance with ISO 11243 - width 120 to 175 mm / 4.72 to
6.89 in.
• The carrier must be assembled on bicycles with wheels with
diameters of 26", 27,5", 28" or 29".
• This carrier is only suitable for carrying children with a maxi-
mum weight of 40 lbs - 18 Kg (USA) (and children with rec-
ommended ages ranging from 1 to 5 years of age - with the
weight as the decisive variable).
• The total weight of the cyclist and the child transported must
not exceed the maximum permitted load permitted for the
bicycle. Information on the maximum load can be found in
the operating instructions of the bicycle. You can also contact
the manufacturer for this question.

02. TECHNICAL FEATURES

MAXIMUM CHILD
WEIGHT 40 lbs
Ø 0.39 - 0.63 in
Ø10 - 16 mm
WARNING
4
NOT OK
NOT COMPATIBLE BICYCLES
RACK HOLDS AT LEAST
59,5lbs ( 27 KG ) LOAD
(18 kg)
IN ACCORDANCE WITH
ISO11243
• The carrier may only be mounted on a bicycle suitable for the
attachment of such additional loads.
• The position of the carrier must be adjusted so that the bicy-
cle rider does not touch the carrier with the feet when in
motion.
• It's very important to adjust correctly the carrier and its com-
ponent parts for optimum comfort and safety of the child. It's
also important that the carrier does not slope forward so that
the child does not tend to slide out of it. It's also important
that the backrest slope backward slightly.
• Check if all the parts of the bicycle function correctly with the
carrier mounted.
• The bicycle to which the carrier is attached must be in good
working order, of a type appropriate for the additional load,
and of proper size and adjustment for the rider. Check the
bicycle user manual or the bicycle manufacturer to obtain
information and to make sure the bicycle model is appropri-
ate to carry a bicycle carrier according to these characteris-
tics.
CARBON
REAR SUSPENSION MOTOR (MOPEDS
FIBER
SHOCK ABSORBER AND SCOOTERS)