Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Caution: Never operate the appliance unattended.
-
someone can touch the hot surface and get seriously burned. All gas appliances should be attended at all
times.
Prior to using your appliance, verify that all of the following is correct:
The burner tube is free of any debris or obstruction.
Installation of the proper gas type and regulator settings.
The proper gas connection is complete.
Check for gas leaks.
Minimum clearances are maintained.
All packaging has been removed.
All parts and components are properly in place.
The grill placed on a firm, non-combustible surface.
LP hose is clean and inspected for cuts, wear, abrasion, or leaks. Replace if necessary with a suitable
UL, ETL or CSA Listed part with internally threaded connector.
Lighting the Appliance
1.
Open the hood. WARNING: Failure to open hood before igniting the burner, or not waiting 5 minutes to allow the gas to
clear if the grill does not light, may result in an explosive flare-up which can cause serious bodily injury of death.
2.
Use caution when lighting burner by standing as far away from the burner as possible. Do not put your
hands, arms, head or any body parts close to the grill when lighting.
3.
To ignite burner, push the burner knob in and slowly rotate counter-clockwise to the high position.
4.
You will hear a loud click as the electronic lighter produces a spark. Listen for the sound of the gas igniting and
look for a flame through the cooking grids. If the burner does not light on the first try, repeat
Immediately.
5.
If the burner does not light in 5 seconds, turn the burner off and wait five minutes with the lid open until the gas
clears before attempting to light it again. Repeat the procedure or try the manual lighting procedure below.
Blaze Outdoor Products Instructional Book
Page | 22
The surface is extremely hot and
Publicité
Table des Matières
