Broan PM400SSV Directives D'installation, D'utilisation Et D'entretien page 8

PREPARE THE CABINET
6. Install the cabinet brackets as follow (FIG. 10):
 Align the bracket flush with the bottom of the right
cabinet side panel, with the hooks marked position (E)
between the bottom embossed holes. For the narrow
edge configuration, trace a line on the top of the
bracket. For wide edge configuration, trace a line at the
bottom of the central slots.
 Lift the bracket flush with the marked lined. Assemble
the bracket to the cabinet side panel using 2 no. 8 x 5/8"
wood screws (included in parts bag) through the upper
holes.
NOTE: Do not use the embossed holes to atttach the
bracket to the cabinet.
  Repeat steps  to  for the left cabinet side panel.
8
Narrow edge
configuration
FLUSH
Wide edge
configuration
FLUSH
E
E
FIG. 10